What’s great about CLR Bath & Kitchen Cleaner is that it’s not just for bathtubs. This multipurpose, multi-surface cleaner takes on calcium, lime, soap buildup and dirt on sinks, showers, toilets, tiles, chrome fixtures and stainless steel. It’s the right product for any bath or kitchen cleaning task.
CLR PRO Calcium, Lime & Rust Remover is a fast and effective way to clean away calcium and lime deposits as well as scale from porcelain, chrome, glassware, fiberglass, stainless steel and grout. CLR is safe on all PVC as well as copper plumbing and septic safe.
Additionally, how do you clean an old porcelain tub? To clean a porcelain enamel tub, start by scrubbing any stains with hydrogen peroxide or equal parts ammonia and baking soda. Then, let the mixture sit on the stains for 5 minutes before washing it away with hot water and dish soap. Next, scrub the rest of the tub using a sponge and soapy water.
Likewise, people ask, how do you remove calcium deposits from a bathtub?
Rinsing the area with a solution comprised of half vinegar and half water will eliminate such spots, without a lot of elbow grease. The solution can be mixed in a spray bottle and sprayed directly onto the affected area. Allow it to soak in. Then, wipe the surface clean with a soft cloth or sponge.
What should you not use CLR on?
Do not use CLR on any natural stone or marble (including cultured marble), terrazzo, colored grout (any other color than white), any painted, coated, sealed or metallic glazed surfaces, plastics, laminates, Formica, Corian, aluminum, galvanized metals, nickel, oil rubbed bronze, brass, copper, steam irons, leaded
Is CLR better than vinegar?
Based on a pH comparison and the acid concentration of CLR vs vinegar, I estimate that pure CLR is about 15 times more effective at dissolving calcium than household vinegar. In other words, 1 cup of pure CLR is as effective as a whole gallon of vinegar.
How toxic is CLR?
Our CLR Calcium, Lime and Rust Remover is non-toxic, water soluble and biodegradable. The chemicals in the product are derived from vegetables, however we recommend all safety precautions be followed, per the back label of the bottle. CLR may etch older sinks, tubs and tiles. CLR is corrosive.
Does CLR remove hard water stains?
For stains above the water line, you do not have to remove the water. Apply the CLR Calcium, Lime & Rust Remover directly to the stains and scrub with the brush or pumice stone. Wait for 2 minutes then flush the toilet. If hard water is an issue for you, it’s probably staining more than your toilet.
Can you use vinegar on copper sinks?
Our Expert Agrees: Copper is a soft metal, so don’t use anything abrasive to clean it. Just wipe it down with a soft sponge or a microfiber cloth dipped in soapy water. You can also use regular or apple cider vinegar, if you prefer. Rinse and towel dry the sink after cleaning it.
What happens if you get CLR on your skin?
SKIN CONTACT: Can be irritating to skin, prolonged contact can be more severe, no adverse effects during normal usage. In case of skin contact, rinse area for at least 15 minutes. Remove contaminated clothing and shoes, wash thoroughly before reuse. Get immediate medical attention if irritation persists.
Can I put bleach in toilet tank?
If you have a large amount of slimy yuck left after the water has drained from the tank, you can spray (or pour) straight chlorine bleach on it. Then run a gallon or two of plain cold water through the tank and toilet and flush until all of the bleach has been flushed through the toilet and it’s gone from the tank.
Can I pour CLR down the drain?
CLR Power Plumber clears almost all household clogged or sluggish drains in seconds without the use of harsh chemicals, acids or lye. It is safe to use on all sound plumbing and works on almost any clog including hair, grease, food and soap build-up.
How do I know if my tub is porcelain or enamel?
If not, a simple test can help you to determine whether your tub is made of enamel or porcelain: put a magnet on it. If it sticks, the tub is enameled metal; if not, it’s porcelain. If you have a porcelain tub, there’s a little $5 product you’ll be so glad you know about: A pumice scouring stick.
Does vinegar remove rust?
The acid in everyday distilled white vinegar, with the aid of salt, will eat through the rust and corrosion afflicting the metal, making it possible for you to scrub it off later with an abrasive pad.
How do you fix a rust stain in a bathtub?
Make a paste using baking soda and a little water. Spread the paste on the areas of your tub that have rust stains. Let this sit overnight. The next morning, gently scrub the paste away with the microfiber cloth. Rinse any remaining baking soda from the tub. Repeat as needed.
How do you clean a badly stained bathtub?
If and when you need maximum cleaning power to address stubborn stains, follow these steps: Make a bathtub cleaner paste of one part hydrogen peroxide to two parts baking soda (or cream of tartar). Rub the paste on the stain and let stand for 30 minutes to one hour, then wipe and rinse.
How do I get orange stains out of my bathtub?
If you have orange stains in your shower, try scrubbing the stains with water and a rough sponge. For older stains that are tougher to remove, mix together baking soda and vinegar until you get a paste, then spread the paste onto the stains. After letting it sit for 15 minutes, scrub the area lightly with a cloth.
Will CLR remove rust from bathtub?
Clean a Tub – CLR. Taking a bath in a filthy tub won’t get you clean. But giving your bathtub a cleaning with CLR® Calcium, Lime & Rust Remover at least once a month will keep built up tub scum out of your soak.