How do I reset my iClicker?

Press and hold the power (labeled on/off) button until the Power light begins to flash. Enter the frequency code using the buttons A, B, C, or D on the iclicker. The frequency code is 2 characters and should match the frequency of the instructors.

Open the iClicker home menu and highlight the course in which you want to change the frequency by highlighting it and selecting Open Gradebook. At the upper left, click on Settings (cog icon). Under the General tab, look for the section labeled Frequency Code.

Beside above, how do I turn on my iClicker? To turn on your iClicker, press the On/Off button at the bottom of the clicker. The power light should shine blue. The clicker will remain on for 90 minutes as long as there is an activated base in your classroom.

Similarly, how do I change the mode on my iClicker?

Change i>Clicker frequency

  1. Turn on your i>Clicker remote.
  2. Hold down the power button for a few seconds until the screen starts blinking two letters.
  3. Select the new frequency using the buttons on the remote. If the frequency you have selected is correct, you will see a green checkmark.

Can you unregister an iClicker?

There is no need to unregister your remote, even if you will no longer be using it. If you sell the remote, the buyer will simply need to register the remote under his/her name. Please note: At that time, the buyer will need to pay a $6.99 registration fee to register the remote on iclicker.com.

How do I know my iClicker is working?

Once you have registered for a class, the clicker can be identified as yours by the instructor’s software. Once in class, simply turn the unit on (bottom button) when polling begins. A blue Power light indicates the unit is working. The handheld iClicker for students is very reliable and easy to use.

How do I know if my iClicker is registered?

Your iClicker remote ID is printed on a sticker located on the back of your remote. The ID is the 8-character code below the barcode. Newer original iClicker remotes have a secondary ID location behind the battery compartment and iClicker 2 remotes display the ID upon power up.

Can you use iClicker on your phone?

iClicker Reef (REEF Polling) iClicker Reef allows you to answer questions using your Android device. After class, access the saved Reef questions to study for a quiz or exam. All data is stored to the cloud so you can access it anywhere from any device.

How do you use iClicker+?

Step-by-step Instructions for Basic iClicker Use Connect the iClicker receiver base to your computer through the USB port. Connect the iClicker flash drive to the USB port on the back of the iClicker receiver base. Navigate to My Computer to locate and double-click the flash drive (usually the E or F drive or called a Removable Disk by the system)

How do I reply to an iClicker?

Press Send to submit your answer when you have finished entering your response. Your answer appears in the bottom row of the LCD screen. NOTE: For all question modes, you can change and resend your answer as many times as you want while polling is open. (For Multiple Choice, simply press another answer choice button.

Why does my iClicker say no base?

With an iClicker 2, you’ll see a “NO BASE” message when you click if your vote wasn’t received. Note: if you are using the iClicker Reef app AND an iClicker, you can only use one or the other in any one class session. If you try to use them both, you may not get points.

How do I reset my iClicker 2?

Press and hold the power (labeled on/off) button until the Power light begins to flash. Enter the frequency code using the buttons A, B, C, or D on the iclicker. The frequency code is 2 characters and should match the frequency of the instructors.

Do you have to click send on iClicker?

Press the A-E button that corresponds to your answer. Your answer appears in the top-left corner of the LCD screen. NOTE: Multiple Choice answers are sent automatically; you do not need to press Send.

Do you need an iClicker to use reef?

Q: Can a student use both REEF and an iClicker remote? Yes, if you enable REEF to be used in your course. Students can still purchase access to and use REEF without purchasing a physical remote.

What is Reef polling access?

REEF Polling by i>clicker lets you use your laptop, smart phone, or tablet to answer quesfions in class and review the material afterwards. * An Android app is in development. In the meanme, you can run REEF Polling using a web browser on your Android device.

How do I change the frequency on my iClicker 2?

Press and hold the power (labeled on/off) button until the Power light begins to flash. Enter the frequency code using the buttons A, B, C, or D on the iclicker. The frequency code is 2 characters and should match the frequency of the instructors.

Can iClickers be reused?

Once the clicker is registered under their name and student I.D. After students are done with their iClickers, they can be reused by someone else after they register them. Once a new user registers, all records of the original user will be replaced.

Is there a clicker app?

The app turns any Web-enabled device into a virtual clicker, with iPhone and Android versions available for both smartphones and tablets. Bofill, who manages all educational technology tools for both faculty and students, explained that an app allows for a number of options. Sometimes, students would switch clickers.