There are many questions as to when a newly installed deck should be stained. Some stain manufacturers suggest you should wait 3-12 months to let the wood dry while others say to stain the deck right away. The answer can be both just as long as you prep the new wood properly for an application of the stain.
The truth is as soon as the wood is dry enough, it is ready to be stained. There is no waiting period for today’s pressure treated wood to let chemicals leach out. Waiting too long to stain and protect your deck means the wood loses more of its ability let the stain adhere.
Furthermore, can I stain pressure treated wood right away? Let this lumber dry out (from a few weeks to six months, depending on the weather and the condition of the lumber) before applying any stain. Kiln dried pressure treated lumber: Dry treated wood is ideal because you can confidently stain it right away with either oil- or water-based exterior stains.
Keeping this in consideration, how do I know if my deck is dry enough to stain?
One way to measure if the deck is dry enough for staining is by using a moisture meter. A moisture meter measures the amount of moisture in the wood. There are one to two probes on the meter that stick into the wood to give you a reading. If using this method, be sure to check the moisture level in several spots.
What happens if you stain wet pressure treated wood?
Recently pressure treated lumber will have a high moisture content and may take several weeks to dry. Staining pressure treated wood is ineffective if the wood is still wet. Pressure treated wood that contains a water repellant will not absorb a water-based stain as well as an oil-based exterior stain.
What is the best deck stain for pressure treated wood?
Best Deck Stains For Pressure Treated Wood In 2020 Thompsons Waterseal Transparent Waterproofing Stain. DEFY Extreme Deck Stains. Valspar Cabot Semi-Solid Stain For Deck. Restore-A-Deck Solid Color Best Deck Stain.
When Can I stain my new pressure treated deck?
It’s important to wait until your pressure-treated wood is completely dry before applying stain, as the chemicals used to treat the wood often leave additional moisture behind. Drying times range anywhere from a few weeks to a few months, depending on such factors as weather and climate.
How long should you wait before you stain treated wood?
Is it better to stain or paint a deck?
Stain is generally less slippery than paint. Some stains are slick, but for the most part they’re flatter and create a less slippery surface than a thick, quality paint job. If safety and slippage is a concern for your deck, stain is generally a better option.
Which deck stain lasts the longest?
Solid stains last the longest. Most last at least three years. One by Behr was by far the longest-lasting. It’s the Solid Color Deck, Fence & Siding Wood Stain from Home Depot.
Can you stain over stain?
Staining over stain is easy and works beautifully if your applying a dark stain over a lighter stain on raw wood. 2. You can mix 2 or more stains together to make DIY custom stains. 3.
What happens if you stain a deck and it rains?
If it rains within 48 hours after you apply the stain, the water will soak into the wood pores and try to displace the stain. This will result in a splotchy surface rather than an even tone. If it rains right after you apply the stain, the stain will peel and flake off.
Can you stain a deck if it rained the night before?
Always make sure the deck is clean and dry before you begin staining. Wait at least 24 hours after washing your deck to apply stain. Also, try to avoid staining your deck right before it rains. Most stains require at least 2-3 hours for drying.
How long does deck stain need to dry?
For best results, avoid staining at midday or in direct sunlight. If a second coat is required, wait 4 hours between applications. Depending on temperature and humidity, allow 24 – 48 hours of dry time before using your beautifully restored deck or porch.
How long should you wait to seal a deck after power washing?
24 to 36 hours
How do I know if my deck boards are dry?
To test lumber for dryness is try putting the edge of the wood into a black garbage bag and leave it in the sun for an hour or two. Then open the bag if there is any condensation on the wood, it’s not dry enough. Another way of telling if you wood is ready for staining is to pour a little water on the wood.
Should water bead be stained deck?
It should be. When water beads up on your ipe deck (or any deck for that matter), that means the finish is repelling moisture and doing its job. The finish on your deck sacrifices itself to the elements in the process of protecting the wood.